|
|
| Recommended
Callshop Hardware -
Quintum Tenor AX + Calling Card Platform |
Technical
This device has a gateway, a gatekeeper and intelligent call routing
and supports QoS all in one solution. 8+ simultaneous calls
Back to info page
|
Scalable server with 8/16/24 or 48
ports with inbuilt calling card platform software |
|
With its MultiPath architecture, the Quintum Tenor connects to the
data network through a 10/100 Ethernet interface, and the voice network
through either a PBX or phone, and the PSTN via aux hunting group. |
| It
is the only VoIP solution that we are aware of that can be installed
without upgrades to the existing voice or data networks. It connects
to the data network through a 10/100 Ethernet interface, and to the
enterprise and public voice network through a T1, E1, or PRI interface.
It is designed to pass calls through to the existing voice network
in the event of system malfunction – even a total power failure.
|
| Special
Feature - Call Saver Programme
We recommend the Quintum hardware
with cardsaver software: this
allows both callshop and calling card managment on a local network
PC. So the reseller can run his own calling card platform by directly
connecting either landlines or the output from a GSM gateway. |
|
|
